Nissan Parts > 240SX > S13 ('88-'93) > Engine Nismo >

Pan Gasket
List Price $12.00
Our Price $9.58
Special gasket improves sealing between oil pan and cylinder block, SOHC only!

240SX/S13, Pickup/D21

KA24 Pulley Set
List Price $250.00
Our Price $199.50
Set consists of aluminum W/P and crank pulleys designed to reduce water pump speed and prevent cavitation at high RPM. Requires modification to the OE crank pulley (hub/damper). The stock damper should be changed at regular intervals. Total alignment between pulleys should not exceed 1/8 inch.

240SX/S13

Optional Drive Gear & Spindle
List Price $32.21 - 100.00
Our Price $25.70 - $99.75
Deteroriation of the surface hardness of the OE steel drive gear can lead to premature wear when running at sustained high RPM. The improved wear characteristics of a bronze drive gear make this a must for all high-performance engines. New bronze drive gear and spindle must be installed as a set.

240SX/S13

Optional Cam Sprocket
List Price $999.99
Our Price $1,329.99
OE KA24 SOHC sprocket modified to use offset bushing for adjusting cam timing. Selection of bushings included. For use with OE timing chain only.

240SX/S13, Pickup/D21

KA24 Billet
List Price $200.00
Our Price $199.50
Cam lobes are underground. SOHC 12-valve engine only.

240SX/S13, Pickup/D21

KA24DE Camshafts
List Price $500.00 - 856.55
Our Price $399.00 - $670.32
These camshafts are designed for the KA24DE engine. The 91-94 240SX/S13 camshafts had a duration of 248 degrees and the 95 and later 240SX/S14 had a duration of 232 degrees. The #1 camshaft is a mild upgrade for the 95 and later 240SX and the #2 camshaft fits both the 240SX/S13 and the 240SX/S14.

240SX/S13, 240SX/S14

Forged Racing Pistons
List Price $120.18 - 175.00
Our Price $95.91 - $199.50
The KA24E cylinder head has an uncut (surface to surface) thickness of 90mm/3.898 inches. Piston dome and combustion chamber must be modified to achieve desired compresion ratio. The JE pistons are designed to accept OE piston rings and require the use of the special Carillo steel connecting rod (12100-40FGT). Each JE piston is packaged with a .866 diameter wrist pin and (4) spriolox.

High Performance Flat Top Pistons
List Price $0.99 - 129.27
Our Price $0.77 - $103.15
Flat top piston for improved performance. These pistons are designed to fit the SOHC 12 valve engine in the 240SX(from eng # KA24 012039) and the pickup trucks (from 10-88 only). These pistons increase compression ratio from 8.6:1 to 9.1:1. Trucks (D21) require the connecting rod to be bushed or connecting rod (12100-53F00) as the piston is a full floating style.

Connecting rod (race)
List Price $250.00
Our Price $266.00
The center to center length of the Carrillo steel connecting rod is indicated in ( ). Includes 3/8 inch SPS bolts rated at 220,000 PSI. Rod weight is approximately 640 grams. Race application only.

Connecting Rod (OE)
List Price $1.72 - 113.67
Our Price $1.37 - $90.71
The center to center length of the OE KA24(D) connecting rod is 165mm/6.496 inches. Connecting rod bolts should be replaced during each rebuild.

240SX, (S13, S14), Pickup/D21

Crankshaft
List Price $749.17 - 793.80
Our Price $647.66 - $686.24
The OE KA24 (D) crankshaft has a stroke of 96mm/3.78 inches.






Nissan Parts > 240SX > S13 ('88-'93) > Engine Nismo >